König Reflex Edge

Die revolutionäre am einfachsten zu montierende Schneekette für Fahrzeuge mit wenig Platz hinter dem Rad
  • Das doppelt starre Bogensystem bietet die einfachsten und intuitivsten Anpassungsvorgänge überhaupt.
  • Die Reflex Box ist die automatische Ein-Klick-Spannvorrichtung, die leistungsstärkste, die es bisher bei König gab. Sie ist vollständig in die Schneekette integriert und spannt alle Kettenteile, sowohl die inneren als auch die äußeren.
  • Das einzigartige Design und die vollständige Integration des Spannsystems sorgen für eine geringere dynamische Anhebung und vermeiden Kontakt zwischen der Kette und dem Radkasten des Fahrzeugs.
  • Gedrehte Glieder für eine geringere Gliederstärke
  • Geringes inneres Auftragsmaß
  • Wheel-Shield Level 1 bietet einen umfassenden Schutz des Rades vor Kratzern, die durch den Kontakt mit Metallteilen entstehen. Alle Komponenten, die potenziell mit dem Rad in Berührung kommen, sind aus kratzfestem Verbundmaterial gefertigt, und die Seitenteile werden durch einen speziellen Nylon-Stoßfänger geschützt. Der Reflex Edge ist mit einem PE-beschichteten Bogen ausgestattet, der die typischen Seitenketten ersetzt, die für Radkratzer verantwortlich sein können.
  • Handliche Tasche aus 95% RPET (recyceltes Plastik)
  • Zulassung/Zertifikate/Konformität: Ö-Norm 5117, EN 16662-1
  • Nicht für den Off-road Einsatz empfohlen

Einfach, intuitiv, superdünn

The chain that represents a revolution in design, ease of assembly and vehicle application.
_x000D_ _x000D_ Ready-to-go
._x000D_ _x000D_ Forget tangled chains: the König Reflex Edge arrives already assembled and does not require the typical hook-and-loop fasteners of classic chains. Simply fit it onto the tyre and tension it.
_x000D_ _x000D_ Intuitive fitting
._x000D_ _x000D_ The Intuitive or Top-Down fitting system involves fitting the chain from the top of the wheel to the bottom. Once correctly positioned, tensioning is operated with a click on the red slider on the Reflex Box.
_x000D_ _x000D_ Reduced static dimensions
._x000D_ _x000D_ The Reflex Edge is designed to minimise the static footprint in sensitive areas of the wheel arch, thanks to the use of specific solutions such as the twisted tread and low-profile connections.
_x000D_ _x000D_ Tread with special steel twisted links
._x000D_ _x000D_ The tread units of the Reflex Edge are made of twisted links that increase the points of contact with the ground compared to traditional linear links and minimise chain thickness at the same time. The choice of materials and surface treatments guarantee the necessary strength.
_x000D_ _x000D_ Automatic squared
._x000D_ _x000D_ The benefit of König automatic tensioning chains is the fact that once fitted they tension themselves while driving, and the Reflex Edge is no exception. _x000D_ A click is all it takes to activate the automatic tensioning and at the first wheel movement, the Reflex Box will tension the inside of the chain, closing it. Et voila!
_x000D_ _x000D_ But the surprises don't end there. The real marvel of the Reflex Box tensioning system is its complete integration with the outer arch of the Reflex Edge, which in turn is connected to the by-pass device and the inner arch. In fact, by connecting in series with the various components of the chain, the Reflex Box device can tension them. Let's see how.
_x000D_ _x000D_ The Reflex Box contains a high-load spiroidal spring which, when actuated, pulls the micro-cable and tension all the components inside which the micro-cable runs. A powerful and immediate tension is modulated by the internal micro-adjustment device and is distributed over all the elements in the chain.
_x000D_ _x000D_ The result is a significantly reduced dynamic footprint thanks to a chain that remains super tight under dynamic conditions_x000D_ _x000D_ Alloy wheel protection
._x000D_ _x000D_ No more side chains: The Reflex Edge brings with it a real design revolution that overturns the appearance of the snow chain.
_x000D_ This is also because the Reflex Edge does not have any outer side chains, the typical elements that can be seen on the outside of the wheel and that connect the grip units to each other.
_x000D_ The design of the Reflex Edge involves the use of a rigid harmonic steel arch instead of side chains, favouring the presence of the chain on the tyre shoulder and not on the rim.
_x000D_ _x000D_ Every component in contact with the rim is protected by a composite material that does not cause scratches to alloy rims. For vehicles equipped with low-profile sports tyres, the Reflex Edge contains a set of rim protection buttons specifically for use on side hooks in the case of low-profile tyres.
_x000D_ _x000D_ Packaging
_x000D_ _x000D_ A practical bag made of 95% RPET (recycled plastic) contains the pair of Reflex Edge chains in addition to the kit. The kit includes fitting instructions, rim protection button kit, repair links, gloves, mat and warranty sheet.
_x000D_

Specifications

External fitting
Intuitive fitting
Traditional Fitting
Automatic tensioning (1 stop for fitting)
Manual tensioning (2 stops for fitting)
Quick external release
Wheel-Shield Rim Protection
Additional traction elements
Micro-adjustability
ABS/ESP compatible
Internal clearance 7 mm

Mounting & Operating manual