The König A-Tractor is the classic agricolture snow chain which is very popular at mountain farmers in the alpine range.
The product design is based on the typical Doppelspur (double-track) cross-section largely covered by ice-breakers to provide additional touch points and digging power.
Being the product destined to agricoltural machinery, not beloning to M2, N2 or O2 classes, the König A-Tractor is not part of the application field of the Ö-Norm V5119.
The product is built following the traditional Professional snow chains construction, meaning that the chain is 100% manufactured in Steel, lacking of any plastic component, cable arch or anything else. Just superior quality steel and the most advanced treatments, plain and simple.
1 of 5Welded side rings are the most heavy duty side connections for snow chains involved into demanding Professional activities. The rings are welded in place and, after that, the complete snow chain is subject to a case-hardening process which ensures that not only cross-sections are treated but also all the side elements, both on the internal and on the external side.
3 of 5The use of welded side rings allows the complete chain to be hardened, including side chains and tightening chains. This results in side elements which are harder compared to standard truck and offroad chains with bent side hooks and they are ready to stand the abuses of heavy duty working conditions.
4 of 5
The central closing hook ensures the cross-sections not leaving any no-chain area in order to reach superior performances, increased stability and a way better driving comfort.
1 of 4Alternation of horizontal and vertical links: this is what the simple link configuration is about.
Vertical links are the ones working more versus the ground while horizontal links act mainly as conjunction between the vertical ones.
The simple link technology is the most gentle while generating a limited vibration level and being the lighest available.
2 of 4The cross-section design is generated starting from two single diamonds getting horizontally flanked and then put in sequence.. This is most typical cross-section design for snow removal chains where the requested traction and resistance level is way higher compared to the typical offroad and truck snow chains cross-sections.
3 of 4
The use of welded side rings allows the complete chain to be hardened, including side chains. This results in side elements which are harder compared to standard truck and offroad chains with bent side hooks and they are ready to stand the abuses of heavy duty working conditions.
1 of 4The inner hook is the connection point of the inner side of the chain.
2 of 4The inner side chain features two or more shackles which are meant to adjust the lenght of the inner side chain, allowing a precise fit on different tyre sizes thanks to a wide adaptability.
3 of 4Welded side rings are the most heavy duty side connections for snow chains involved into demanding Professional activities. The rings are welded in place and, after that, the complete snow chain is subject to a case-hardening process which ensures that not only cross-sections are treated but also all the side elements, both on the internal and on the external side.
4 of 4
The König A-Tractor is the very classical agricolture snow chain providing traction to safely move on snowy, icy and slippery surfaces
Compared to a Supertractor, the König A-Tractor is based on the DS (double track) design enriched with a large number of ice-breakers covering the central tire tread
Destined to the agricoltural tractors, the König A-Tractor is available with different wire diameters (7.00, 8.00 and 10.00mm)
